Praharit Pigment is the leading manufacturers of Pigment Green 7 & worldwide provider of high quality custom manufacturing services to the quality pigments for many industries.
All the commercially available Phthalocyanine Green Pigments are based on Halogenated copper phthalocyanine. Pigment Green - 7 is based on Chlorinated copper Phthalocyanine , the chlorine content varies between 13 to 15 atoms of chlorine per molecule. This corresponds to a variation in emperical formula from C32H3N8Cl13Cu to C32HN8Cl15Cu
Highlights :
Ami Organics Pigment Green 7 is available of international standard with consistence Quality
These Pigment are not associated with toxic hazards or with fire explosion risk.
The phthalocyanine Green Pigments have excellent all round fastness properties in all type of media.
Phthalocyanine Green Pigments have high tintorial strength an excellent fastness to solvents, heat, light, weathering and good dispersion properties
Grades Available :
Phthalocyanine Green Pigments are commercially available in shades ranging from...
1. The Bright, Very Bluish Green with low chlorine content.
2. Pigment Green 7 type, the bright bluish Green with high chlorine content.
3. Very Bright Yellowish Green
4. Chlorobrominated pigment Green - 36 types
Fastness Properties :
The Phthalocyanine Green Pigments have excellent all round fastness properties in all types of media
Application Properties :
Phthalocyanine Green Pigments has high tintorial strength and excellent fastness to solvents, heat, light, & weathering. It has excellent dispersion properties. Due t 0 these characteristics of this pigments it is widely used in the following Industries.
Paint Industries
Plastic Industries
Textile Industries
Ink Industries
Leather Industries
Paper Industries
Soaps & Detergent Industries
Rubber Industries
Economics of use :
Phthalocyanine Green are among the most cost-effective Pigments available, particularly when-allround fastness properties are required
Health & Enviromental Aspects :
These pigments are not associated with toxic hazards or with fire and explosion risk
MSDS - MATERIAL SAFETY DATA SHEET
1. IDENTIFICATION OF THE SUBSTANCE
Identification of the product Trade name :- Pigment Green 7 Chemical name :- Copper Phthalocynine Green Color Index name :- PG7
2. HAZARDOUS INGREDIENTS
None
3. HAZARDS IDENTIFICATION
Most important hazards (effects Overexposure)
Eyes and skin :- May be irritating upon prolonged repeated contact
Ingestion:- may cause gastro-intestinal disturbance.
4. FIRST AID MEASURE
Eyes :- Flush with large amount of water for at least 15 minute, seek medical Attention if irritation persists.
Skin :- Wash with soap and water.
Ingestion :- Never give anything orally to unconscious person. Otherwise give Two glasses of water and seek medical attention.
5. FIRE- FIGHTING MEASURE
Use fire fighting measure that suit the environment. No special methods needed.
Suitable extinguishing media :- Water, carbon dioxide, nitrogen oxide.
6. ACCIDENT RELEASE MEASURE
Personal precautions :- Avoid making dust; contact with skin and dyes. As a general precaution: wash thoroughly after contact with pigment.
Environmental measures :- No special measure required, comply with local Regulations.
Methods for cleaning :- Vaccum clean dust with equipment fitted with Hepa Filter, or spread absorbent material. Collect into suitable container for Disposal. For large spills, licks with inner material collect spilled material for Possible salvage or disposal. Restore all large spills to environmental authorities. Wash contaminated and surface through/ with and detergent. Waste disposal Methods should be in accordance with methods set forth by local, state and Federal authorities.
7. HANDLING AND STROAGE
Max storage temperature :- 100 oC
Preferred storage :- Indoor, dry, store in accordance with standard approved warehousing procedures. Repair all bags immediately. Do not store with eatables.
Handling :- All handling may cause dust emission. Organize the handling in such a way, that the creation of dust is minimized. Secondary dust emission may be minimized by means of good housekeeping.
8. EXPOSURE CONTROL/ PERSONAL PROTECTION
Engineering measures taken before personal protection equipment is necessary: - Adequate ventilation to keep dust level below local TLV for nuisance dust.
Components with critical values that require monitoring at work place:-
Personal protective equipment:-
Respiratory:- Wear disposal respiratory marks, suitable for nuisance dusts. Protection of skin and eyes:- wear gloves and overalls. Wear goggles to safety glasses with side shields. General protective Equipment: - cleaning of contaminated garments by suction; do not brush or use compressed air.
9. PHYSICAL AND CHEMICAL PROPERTIES
Form :- Powder
Color :- Bright Green & Odorless
Melting point/melting range :- N.A.
Boiling point/ boiling range :- N.A.
Flash point :- N.A.
Flammability :- N.A.
Danger of explosion :- None
Oxidizing properties :- None
Evaporation rate :- Not Applicable (Air=1)
Vapor pressure (mm hg) :- Not applicable as material is in powder form.
Solubility in water :- Insoluble
Percentage volatile (by weight) :- Less than 1%
pH :- 7.0 + 0.5
10.STABILITY AND REACTIVITY
Stability Unstable :- Conditions to Avoid
Conditions to be avoided :- None in designed use
Decomposition products :- Oxides of carbon and nitrogen , (At temperature above stability range)
11. TOXICOLOGICAL INFORMTION
Based on product of a similar structure and composition
LD50/oral/rat :- > 5000 mg/kg
Skin irritation :- Non-irritant
Eye irritation :- Non-irritant
12. ECOLOGICAL INFORMATION
General notes:- The product being a rather stable intensely green powder Should be handled in such away, that it will not contaminate the Environment. No further negative effects on the environment are known.
13. DISPOSAL CONSIDERATIONS
Product: - Waste from this material is not considered as dangerous waste According to EU rules and can generally be through to a normal tip with a Permit to handle industrial waste. When contaminated with dangerous Products the advice of an expert has to be obtained. In general the product is Dusty, and as long as it has been adequately wetted, it should be packed in Well-closed containers for removal. Check the local regulations and Requirement.
Empty packing :- As above
14. TRANSPORT INFORMATION
Additional information :- Not classified as dangerous goods.
15. REGULATORY INFORMATION
Designation according to EC guidelines:
16. OTHER INFORMATION
The information contained herein based on present state of our knowledge. All data given are in good faith but no warranty, expressed or implied, is Made. Material safety data sheet can never serve the purpose of a Specification.
